Push-Pull Rods
Push-Pull Rods will save you a lot of time and money. Tape your wire
on to the leading rod and push it to the desired location by adding additional
rods (they just screw into each other). Or you can tape the wire to the
rod (or hook it) and pull the wire to you from a distant location.
For large cables you may want to use the Push-Pull Rods in the same manner
to put a rope in place. Attach the rope to the cable and pull the cables
with the rope.
It's great for going under carpet! You can also tape a penlite (not included)
to the rod for visibility.
Order a set of rods today!
Each rod is made of aluminum alloy, 27" long and 3/4" O.D. and
weighs only 5 oz. A set of 20 weighs less than 5 1/2 lbs! Flexible yet sturdy!
The coated sets feature a 1000 V.D.C. dielectric strength coating, which
is both tough and durable. (Spec sheet on coating is available.) A tough,
durable vinyl tote bag comes with each set.
Push-Pull Rods are available in these 4 sets
20 PLAIN rods (45 ft.) not insulated ... PPR-20-P
10 PLAIN rods (22.5 ft.) not insulated ... PPR-10-P
20 COATED rods (45 ft.) insulated ... PPR-20-C
10 COATED rods (22.5 ft.) insulated ... PPR-10-C
Use Push-Pull Rods for security installation!
Push-Pull Rods are a real time saver when you need to pull those
wires around the perimeter of a house or building!
[ Tips | Price
List | Shipping & Guarantee | Contents
| Home ]